The Solution to Your Winter Operating Puzzle!
Benefits of Cobra™ Spray Systems:
- Reduces manpower needs
- Eliminates the need for gravity-fed systems that are left on or that do not regulate the product output
- Eliminates the need for salamanders that can create safety issues
- Eliminates excess product consumption throughout severe weather and storms
When Severe Winter Weather Hits...
Midwest Offers You 3 Ways to Spray and Operate
While Others are Forced to Shut Down!
1. Cobra™ Auto-Spray System
The Auto-Spray System is programmed to turn on automatically, and will spray the top cover, bottom cover or both simultaneously. It will then turn itself off and is ready for the next pre-programmed spraying cycle.
The Cobra™ Auto-Spray System controller has a main power switch which must be turned on manually. With power to the system, the system timer turns on the pump at pre-set intervals (for example, every hour, etc.) and leaves the spray on for a pre-set interval (for example, one complete belt revolution or 2 minutes, 3 minutes, etc.) then turns the pump off. It’s then ready to be turned on at the next designated time.
2. Cobra™ “Press and Go” Spray System
With the Cobra™ “Press and Go” Spray System, you just press “start” and walk away! The system will spray for a pre-set time and then turn itself off. It’s then ready for the next spraying session.
3. Cobra™ Manual Spray System
The Cobra™ Manual Spray System is turned on and off manually using a toggle switch located on the unit.
4. NEW King Cobra™ Spray System
Prevents cold temperatures from causing belt surface friction loss as well as ice build-up on pulleys and idlers. The system’s processor handles temperature changes automatically. The King Cobra™ is programmed to measure outside ambient temperature fluctuations and adjusts system parameters eliminating the need for re-adjustment by personnel. This results in minimum labor and maximum efficiency by substantially reducing chemical usage.
Technical Data Sheet
| Manual | Press and Go | Auto | King Cobra | |
| Operation | Turn system on or off manually using the toggle switch | System will spray for whatever pre-set time is entered and then turn off automatically |
When system is activated the system timer turns the pump on/off |
When system is activated the system timer turns the pump on/off |
| Pump | Oberdorfer Bronze Rotary Gear Pump (Pedestal N3000RS) |
Oberdorfer Bronze Rotary Gear Pump (Pedestal N3000RS) |
Oberdorfer Bronze Rotary Gear Pump (Pedestal N3000RS) |
Oberdorfer Bronze Rotary Gear Pump (Pedestal N3000RS) |
| Motor | Baldor 3/4 H, 1140 RPM, 120 VAC |
Baldor 3/4 H, 1140 RPM, 120 VAC |
Baldor 3/4 H, 1140 RPM, 120 VAC |
Baldor 3/4 H, 1140 RPM, 120 VAC |
| Time Control |
N/A
|
BR 1 Series Reset |
Eagle Signal Control SX210 Series IDEC |
Unitronics M90/M91 Micro-OPLC
|
|
Thermostat
|
N/A
|
N/A |
White-Rogers 2B61-Outdoor Heat Pump Thermostat
|
Built-In Thermostat |