 |
 |
 |
Is dust getting into moving engine components causing friction that results in mechanical stress and maintenance problems? Is poor visibility from dust during take off and landing causing safety issues? You may be required to meet Federal EPA criteria for fugitive dust control on all disturbed or open areas around your facility. That means you must comply with fugitive dust suppression regulations as they relate to air quality, as well as comply with water quality and stormwater regulations.
Midwest Industrial Supply, Inc. has three primary products designed specifically to eliminate dust and FOD on unpaved roads, runway shoulders, equipment staging areas, main supply routes and many other types of surfaces. Over the past 30 years, our products have been extensively used in the field, developed in our state-of-the-art laboratory and tested by independent organizations to provide superior performance and results.
To see more information, technical specifications, articles and bulletins, environmental data and success stories, make a selection from the products below:
Soil-Sement®
A polymer emulsion blend that “cures” and dries clear while creating a hard, water-resistant surface. It can be applied topically or as part of a GCP (Good Construction Practice) method of application. Soil-Sement® meets strict performance standards specified and verified by independent ASSHTO Accredited Laboratories, and stringent environmental criteria with the City Aviation Departments Environmental Division.
EnviroKleen®
Synthetic Organic Dust Control™ that is clear to slightly tinted upon application. It is considered non-hazardous, colorless, odorless and will not create oil-sheen. EnviroKleen® coats the soil but does not bind it and does not require dilution with water.
EK35®
Formulated with the same Synthetic Organic Dust Control™ as EnviroKleen®, but modified with naturally-occurring resins that work to agglomerate fine silt or clay particles so they cannot become airborne. EK35® is particularly well suited for situations with heavy equipment traffic. The natural penetration and action of the traffic “work” the EK35® into the surface.
Road Oyl®
A patented resin-modified emulsion that provides a cold applied high performance treatment for bare earth or unpaved roads. Formulated from tree resin ingredients, this state-of-the-art, non-ionic emulsion technology is unique in its high bonding strength and is appropriate for use even in close proximity to wetland areas and other areas of environmental sensitivity. Road Oyl® provides the clean, high performance technology needed for any type of project requiring dust control and soil stabilization.
Midwest also understands that managing a program in-house can be extremely difficult. And outsourcing is not necessarily easy. We have the programs that provide either turnkey control of fugitive dust or a guaranteed program of monitoring and maintaining the prescribed level of dust control. For more information, make a selection of the programs below:
If you are in any branch of the department of defense and would like more information specific to the Military, please visit WWW.MILDUST.NET
