Home :: Our Products :: MoFoam® :: MoFoam® Brochure

You are here

The Reliable and Economical Solution to Process Handling Dust Suppression

          MoFoam® treats dust particles
          and makes them heavier to stay
          with the material flow.

Unique chemical technology for exceptional, economical dust suppression!       Before MoFoam® Application       After MoFoam® Application

Chances are you’re being squeezed by increasing demands for more dust control on one side, and a rigid operations budget on the other. As a result, it has never been more important to invest your dust control dollars wisely. Despite these challenging conditions there is an answer which enables you to do both. In today’s market, the control of airborne particulates is an increasingly important aspect of today’s operations. As regulatory pressure to control dust increases, operators are finding that the exposure presented by uncontrolled dust can be expensive. One way to improve profits and reduce shipped moisture levels is to prevent water from being added in the first place. MoFoam® modular foam dust suppression system can be applied at the crusher or transfer points in place of “wet sprays” to reduce moisture dramatically while still controlling fugitive dust. The MoFoam® modular foam dust suppression system spray uses different spray header design and configuration based on the application. The high pressure foam agent penetrates to the dust particles. MoFoam® foam bubbles have a much larger surface area than untreated water and do a much better job of capturing dust particles thereby reducing dust.

MoFoam® modular foam dust suppression system uses our unique multi-component concentrated foaming agents containing wetting agents and residual dust containment agents. The system controls fugitive dust emissions from materials during loading, unloading, crushing, transferring, stockpiling, reclaiming, and other material handling procedures. The MoFoam® control unit is simple, rugged and easy to use with non-corroding materials used throughout the system.  The control unit can be free standing or wall mounted. There is an electric remote control operation available. The MoFoam® control unit is simple to operate. Rugged, corrosion-resistant materials are used throughout the system, which is stand mounted. Operation can be controlled manually or automatically. The MoFoam® modular foam dust suppression system is fully adjustable to control foam moisture, and the foam discharge rate is adjustable for each application point.

Dust can be LOST Revenue!             Before MoFoam® Application           After MoFoam® Application

System Model Performance

Model 750

One Control Unit, can treat 2 - 4 transfer points up to 150’ apart. Foam unit is activated  by belt load and movement. For winter operation, MoFoam® control unit and chemical tank require heated enclosure. Water supply and foam discharge require insulation and heat trace.

System includes:

• Foam control unit, stand mounted
• Supply and discharge piping or hose
• Foam discharge manifolds or chute nozzle assemblies